Compaq VAX 7000 Installationsanleitung PDF herunterladen (Seite 12)

• DEC 7700/10700 AXP CPU Module

+ Called KN7AB

+ Based on 21064A, EV4_5 Alpha RISC chip

+ 275 MHz clock, ~50% faster than KN7AA

+ Cannot be mixed with KN7AA

+ Part No. = E2057-AA

• Primary (boot) CPU must reside in slot 0 (LHS, front) of LSB

3.1.4.2 Memory Modules

• 64 MB Memory Module (MS7AA-AA), Part no. = E2043-AA

• 128 MB Memory Module (MS7AA-BA), Part no. = E2043-BA

• 256 MB Memory Module (MS7AA-CA), Part no. = E2043-CA

• 512 MB Memory Module (MS7AA-DA), Part no. = E2046-AA

• 2 GB Memory Module (MS7AA-FA), Part no. = ?????-?? (has SIMMs)

• 16 MB BBU Memory Module (MS7BB-AA), Part no. = E2049-AA, for Prestoserve sup-

port on DEC OSF/1 AXP systems

• One memory module must reside in slot 7 (next to IOP) of LSB

3.1.4.3 IOP Module

• IOPC module, Part no. = E2044-AA

• Only 1 allowed, must be in dedicated slot 8 (LHS, rear) of LSB

• Up to 4 hose (actually ﬂat!) cables out to XMI or Futurebus+

3.2 Laser Expander Cabinet

Refer to Figure 3, Laser Expander Cabinet Layout

The expander cabinet is the same as the system cabinet without the CPU bits. It has no

LSB card cage or OCP. In place of the LSB card cage, 2 more PIUs can be installed. Due to

weight and cabling restrictions these can only be storage PIUs. A TF85 or RRD42 may be

ﬁtted as in the system cabinet. A maximum of 2 expander cabinets is allowed.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 49 50

Keine Kommentare

Compaq VAX 7000 Installationsanleitung Seite 12