/
VSP-C0459
Video signal : 0.7V p-p +10% -5%
8
3.2 Signal Input
3.3 Video Performance
•The rise and fall time of the input video signal is 2.0nsec or less.
•The pulse rise or fall time is determined using the formula :
Ta = Tm
2
- (Ts
2
+ Tp
2
+ Tsc
2
)
Where : Ta = Amplifier rise / fall time
Tm = Measured rise / fall time
Ts = Input signal rise / fall time
Tp = Probe effect on rise / fall time = 2.2 x Rl x Cp
Rl = Amplifier output resistance (ohm)
Cp = Total probe capacitance (F)
Tsc = Scope rise / fall time = 0.35 / Scope
bandwidth (MHz)
Video Input Signal R.G.B analog
Sync. Input Signal
External composite sync. , Negative TTL
External HD/VD separate sync. TTL (N or P)
Video Input Impedance 75Ω to ground
Sync. Input Impedance 2.2kΩ to ground
Signal Level
Separate H/V-sync. : TTL level ( >2.5V)
Video Clock Frequency 240MHz
Pulse Rise and Fall time
3.Electric Specifications
3.1 Deflections
Horizontal
Scanning Frequency
Back Porch
Blanking
30 - 121kHz
≥1.0 µsec
≥ 2.0 µsec
Vertical
Scanning frequency
V-sync Width
50 - 160Hz
V-sync + V-back Porch
≥ 400 µsec
H-sync Width
≥ 0.6 µsec
V-Total Line
≥ 256H + V-sync Width
2H ≤ Vs ≤ 10H---up to 50kHz (fh)
(*) Full screen adjustment may not be available for the timing which
Tdh / Th < 72% - Over 100kHz (fh)
Tdh / Th < 74% - Up to 100kHz (fh)
Tdh : Horizontal Display Time
Th : Horizontal Scanning Time
3H ≤ Vs ≤ 10H---over 50kHz (fh)
4.0nsec(typ.) 10 to 90% at 35Vp-p
Composite sync with Green video (Sync on Green)
Sync on Green : 0.3V p-p ± 10%
Kommentare zu diesen Handbüchern