Compaq System/E25 Betriebsanleitung PDF herunterladen (Seite 17)

B. Racking a Field-Rackable Array

7. Drop the rail tab lower notches onto

the locating rod (see Fig. 34). Slide

the locating rod clips against the

mounting tabs at each end of the rod.

(The clips prevent the rod from

sliding out of the column.)

8. Repeat steps 4 through 7 for the left

rail.

Fig. 34. Positioning rails over locating rods in Compaq 9000

9. Insert a 5/16-18 sheet metal nut in

each marked hole on the columns

(see Fig. 35). Use a flat-blade

screwdriver to assist in installing the

nuts.

10. Tighten a 5/16-18 screw through the

innermost slot in each rail end and

into the sheet metal nut.

Fig. 35. Attaching rails to columns in Compaq 9000

11. Install one 10-32 clip nut each on

the right and left front columns (see

Fig. 36). (Use the black arrow on the

template as a guide.)

Fig. 36. Installing front column nuts in Compaq 9000

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Keine Kommentare

Compaq System/E25 Betriebsanleitung Seite 17