Compaq AlphaServer DS20 Wartungshandbuch Seite 129

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 182
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 128
Removal and Replacement 4-39
Removal
1.
Shut down the operating system and turn the system off.
2.
Unplug the AC power cords.
3.
Expose the power section of the system (see Section 4.3).
4.
Remove the power and signal cables from the UltraSCSI bus extender on the side
of the StorageWorks shelf.
5.
Remove the power harness and all signal cables from the StorageWorks
backplane and the power transition module and lift it out of the way.
6.
Using a short Phillips head screwdriver, remove the screws holding the backplane
to the back of the shelf and remove from the system.
Replacement
Reverse the steps in the Removal procedure.
Verification
Power up the system. Use the show device console command to verify that the
StorageWorks shelf is configured into the system.
Seitenansicht 128
1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 181 182

Kommentare zu diesen Handbüchern

Keine Kommentare