
Third-Party Platform Support Specifications
Configuration Guidelines
For complete configuration examples and instructions for the switch, refer to the Sun StorEdge network FC switch-8 and
switch-16 Installation and Configuration Guide.
Note – The FC switch-8 and switch-16 guide offers configuration procedures and examples for both the Sun StorEdge T3
array and for other arrays. Instructions and examples only for the Sun StorEdge T3 arrays apply to third-party operating
environments.
The configuration guidelines for operating the switch in a third-party operating environments are like those found in
Chapter 2 of the FC switch-8 and switch-16 guide. However, there are some additional guidelines as follows:
■ Arrays
■ Sun StorEdge T3 array for the workgroup and the enterprise are supported.
■ Other Sun StorEdge arrays are not supported.
■ Switches
■ For High Availability applications, configure two switches in parallel.
■ Zones for switch port groups
■ A maximum of four devices for each zone is possible with the Sun StorEdge T3 array.
■ A minimum of two ports for each zone are needed. For example, a 16-port switch can have a maximum of eight
zones.
■ For the Sun StorEdge T3 array, you may have a maximum of four arrays and two host I/O transfer initiators,
unless the host is using Windows NT. Windows NT support includes one host I/O transfer initiator.
■ The AIX and HP-UX operating environments support dynamic addition of storage to a zone, but Windows NT
does not. Because you must reboot the host to recognize storage added to a Windows NT host, the process is not
dynamic.
■ The Host Bus Adaptors (HBAs) for all hosts in a zone must be of the same make and model, using the same
firmware and device driver. Different HBAs or HBA firmware in a zone is not supported.
TABLE 2 Hardware and Software for Third-Party Operating Environments
Operating System and
Patches Host
Host Bus Adaptor
(HBA) HBA Driver HBA Firmware
Cluster
Configuration
HP-UX Version 11.0
with
HP-UX General
Release and Hardware
Enablement and
Critical Patches 12/00
HP N/V Class HP A3740A B.11.00.03 Tachyon FC none MC Service
Guard 11.12
HP K/D Class HP A3404A B.11.00.03 Tachyon FC
HP L/N/V Class HP A5158A B.11.00.05 Tachyon
TL/TS
AIX Version 4.3.3.0
minimum level:
maintenance level 2
IBMRS6000Models:
150, 170, 270, B50,
F50, F80, H70, H80,
M80, S80 and P
series models 640
and B80
IBM FC#6227 devices.pci.df1000f7rte
minimum level:
Version 4.3.3.27
minimum level: ROS
Level 02903290
HACMP
Version 4.4
Microsoft Windows
NT 4.0 Service Pack 6
Intel QLogic
QLA2200F/66
Version 7.05.05 minimum level:
Version 2.01.16
none
Emulex
LP8000-F1/N1
Version 4-4.52a7 minimum level:
Version 3.81a1
Kommentare zu diesen Handbüchern