Compaq 380 Spezifikationen PDF herunterladen (Seite 48)

2-36 Compaq ProLiant DL380 Generation 2 Server Maintenance and Service Guide

PCI Expansion Board Ejector/Divider

To remove the expansion board ejector/divider:

1. Power down the server. See the “Powering Down the Server” section in this chapter.

2. Extend or remove the server from the rack. See the “Preparation Procedures” section in

this chapter.

3. Remove the access panel. See the “Access Panel” section in this chapter.

4. Remove the PCI riser cage. See the “PCI Riser Cage” section in this chapter.

5. Remove the three Torx T-15 screws that secure the expansion board ejector/divider .

6. Slide the expansion board ejector/divider toward the rear of the cage . This action

dislodges the front tabs of the ejector/divider from the front of the cage.

7. Remove the expansion board ejector/divider from the cage .

Figure 2-35. Removing the PCI expansion board ejector/divider

Reverse steps 1 through 7 to replace the PCI expansion board ejector/divider.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 120 121

Keine Kommentare

Compaq 380 Spezifikationen Seite 48