
Removing an Optical Drive
CAUTION: All removable media should be taken out of a drive before removing the drive from the
computer.
To remove an optical drive:
1. Disconnect the power cable (1) and data cable (2) from the rear of the optical drive.
Figure 7-19 Disconnecting the Power and Data Cables
2. Remove the two screws that secure the drive to the drive cage (1), then slide the drive out of the
front of the chassis (2).
Figure 7-20 Removing the Optical Drive
NOTE: To install an optical drive, refer to Installing an Optical Drive into the 5.25-inch Drive Bay
on page 56.
Drives 55
Kommentare zu diesen Handbüchern