Compaq Wireless LAN 100 Technical Information Seite 54

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 121
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 53
5. Open the device as far as possible.
6. Remove the Phillips PM2.0×4.5 screw (1) and the Phillips PM2.5×5.0 screw (2) that secure the top
cover to the base enclosure.
7. Lift the rear edge of the top cover (1) and swing it up. Then slide the top cover back slightly to rest
against the display assembly (2) at an angle.
8. Release the ZIF connector (1) to which the TouchPad button board cable is connected.
46 Chapter 4 Removal and replacement procedures
Seitenansicht 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 120 121

Kommentare zu diesen Handbüchern

Keine Kommentare