Compaq PC CARD ADAPTER Bedienungsanleitung PDF herunterladen (Seite 25)

USING THE AUTOLINK

FEATURE FOR NETWARE

The AutoLink feature for NetWare conﬁgures the adapter as a

NetWare DOS ODI client. The AutoLink installation steps are

depicted in Figure 3-1.

Figure 3-1 AutoLink Installation Process

This chapter describes the AutoLink program requirements,

ways to avoid memory conﬂicts, and installation steps. See

Chapter 4 for additional network drivers information.

The AutoLink program performs the following functions:

■ Conﬁgures the 3C689 adapter.

■ Tests the adapter.

■ Installs the DOS ODI client driver.

■ Logs on to the server and updates the NetWare client

software if a 3Install account exists on the server; otherwise,

the client software is installed from the TokenDisk diskette.

Insert

TokenDisk

diskette.

Make diskette drive active.

Type: AUTOLINK

Select ring speed

Reboot computer

If memory manager is installed,

exclude memory range

CC000 – D3FFF

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 75 76

Keine Kommentare

Compaq PC CARD ADAPTER Bedienungsanleitung Seite 25