Compaq Aero 1520 Betriebsanweisung PDF herunterladen (Seite 22)

Cambridge Aero Explorer User’s Guide

Chapter 3. Communication with Data Recorder

Connecting to recorder

Before you can access the information in your Cambridge logger, it must be connected to

your computer. To connect your recorder to the Cambridge Aero Explorer, follow these

steps:

1. Connect your recorder to your computer with a serial cable.

2. Make sure your recorder is turned on. Some recorders will need to have power

supplied to it from either an A/C adapter or external battery. Consult with the

manual supplied with your logger on how this is done.

3. Start the Cambridge Aero Explorer software. By default, the software will check

each COM port available on the system and try to find a valid port with a recorder

connected. Once a valid COM port is located, that port will become the default for

future sessions

4. If the Cambridge Aero Explorer is already running when you connected your

recorder, you can make a connection by choosing Connect From the Recorder

menu.

Once the connection is made, a few seconds later the recorder pane will be filled in with

information from your recorder.

If you experience problems connecting to the recorder, check the troubleshooting section

in the Appendix.

Note: If you are having trouble connecting, first close all other programs that might use

the serial port. This especially includes programs that synchronize data between a

pocket/PDA computer and your PC. ActiveSync and HotSync are two such programs

that must be closed if connection problems occur.

Recorder Properties

From the Recorder menu, choose Properties. This screen contains essential GPS-NAV

data. Change any data necessary then click Transfer Configuration to Recorder.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 37 38

Keine Kommentare

Compaq Aero 1520 Betriebsanweisung Seite 22