Compaq 4000S Spezifikationen PDF herunterladen (Seite 73)

9. Connect the power cable (1) and data cable (2) to the rear of the optical drive.

NOTE: The power cable for the optical drive is a three-headed cable that is routed from the

system board to the hard drive, then to the rear of the optical drive.

Figure 6-25 Connecting the Power and Data Cables

10. Rotate the drive cage back down to its normal position.

CAUTION: Be careful not to pinch any cables or wires when rotating the drive cage down.

Figure 6-26 Rotating the Drive Cage Down

11. Replace the access panel.

12. If the computer was on a stand, replace the stand.

13. Reconnect the power cord and turn on the computer.

14. Lock any security devices that were disengaged when the access panel was removed.

The system automatically recognizes the drive and reconfigures the computer.

Removing an Internal 3.5-inch Drive

CAUTION: All removable media should be taken out of a drive before removing the drive from the

computer.

Drives

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 187 188

Keine Kommentare

Compaq 4000S Spezifikationen Seite 73