Compaq 2000fc Spezifikationen PDF herunterladen (Seite 69)

5. Remove the fan/heat sink assembly by lifting it straight up.

NOTE: Steps 6 through 10 apply only to computer models equipped with AMD processors.

6. Turn the system board right-side up, with the front toward you.

7. Disconnect the fan cable from the system board (1).

8. Remove the Phillips 3.0 x 2.0 screw (2) that secures the fan/heat sink assembly to the system

board.

NOTE: Due to the adhesive quality of the thermal material located between the fan/heat sink

assembly and system board components, it might be necessary to move the fan/heat sink

assembly from side to side to detach the assembly.

9. Follow the sequence embossed on the heat sink to loosen the six Phillips 10.0 x 2.0 captive

screws (3) that secure the fan/heat sink assembly to the system board.

Component replacement procedures

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 93 94

Keine Kommentare

Compaq 2000fc Spezifikationen Seite 69