Compaq 1800 Anleitung zur Fehlerbehebung Seite 59

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 125
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 58
24 T
ROUBLESHOOTING
P
RESARIO
N
OTEBOOK
M
AINTENANCE
AND
S
ERVICE
G
UIDE
1800 S
ERIES
Presario 1800 Series
Models: XL180, XL181, XL182, XL183, XL184, XL185,
and XL190, XL191, XL192
**This problem indicates that the backlight or its power circuitry has failed. If the backlight is
not functioning, the POST result cannot be observed. Connect the unit to an external
monitor before powering up the unit. If an external monitor is not available verify that POST
is complete by opening and closing the display, listening for the single or double beep, and
watching for the icons to turn on at the front of the notebook.
Screen is blank. Display has overheated. If the Notebook is in direct
sunlight, move it and allow it to
cool off.
Display is blank and
the Standby icon is
flashing.
System is in Standby mode. Press any key or touch the
TouchPad.
Notebook display is
blank and the screen
on an external monitor
displays information.
Display function was switched
to the external monitor.
Use Fn+F3 to switch between
LCD or CRT.
Notebook display
flashes or has garbled
characters when
Notebook is connected
to external monitor.
The external monitor is set for
1024x768 or higher resolution
and view is toggled back to
the Notebook display, which
supports up to 800x600.
Restart the Notebook.
The light tubes on the
edge of the display
panel do no light up at
all and the Power-On
Self-Test (POST)
completes when the
unit is powered up.**
Improper backlight or display
cable connections
1. Check the display cable
connections and retest.
2. Replace the display assembly
.
Defective inverter board. Replace the display assembly
.
Defective display cable. Replace the display assembly.
Defective display panel. Replace the display assembly
.
Defective system board. Replace the system board.
The light tubes on the
edge of the display
panel do not light up
at all and Power-On
Self-Test (POST) does
not complete when the
unit is powered up.**
Defective system board. Replace the system board
.
Display
Problem Probable Cause Solution(s)
Seitenansicht 58
1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 124 125

Kommentare zu diesen Handbüchern

Keine Kommentare