Compaq 1500 Anleitung zur Fehlerbehebung Seite 38

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 217
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 37
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting 3-11
3.6 Diagnostic Error Codes
Diagnostic error codes occur if the system recognizes a problem while running the
Compaq Diagnostic program. These error codes help identify possibly defective
subassemblies.
Tables 3-4 through 3-14 list possible error codes, a description of the error condition,
and the action required to resolve the error condition.
IMPORTANT: Retest the system after completing each step. If the problem has been
resolved, do not proceed with the remaining steps.
For assistance in the removal and replacement of a particular subassembly, see
Chapter 7, "Removal and Replacement Procedures." For removal and replacement
procedures for the convenience base, see Chapter 8.
Table 3-4
Processor Test Error Codes
Error
Code Description Recommended Action
101-xx CPU test failed Replace the processor board and retest.
103-xx Coprocessor or Weitek Error
103-xx DMA page registers test failed Replace the system board and retest.
104-xx Interrupt controller master test failed
105-xx Port 61 error
106-xx Keyboard controller self-test failed
107-xx CMOS RAM test failed
108-xx CMOS interrupt test failed
109-xx CMOS clock test failed
110-xx Programmable timer load data test failed
113-xx Protected mode test failed
114-01 Speaker test failed
1. Check system configuration.
2. Verify cable connections to speaker.
3. Replace the system board and retest.
Seitenansicht 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 216 217

Kommentare zu diesen Handbüchern

Keine Kommentare