Compaq MP1200 Betriebsanweisung PDF herunterladen (Seite 19)

2–8 Compaq iPAQ Microportable Projector MP1200 User’s Guide

Using the Projector

Adjusting the Projected Image

There are three ways to adjust the projected image:

■

Adjusting the projector height

■

Adjusting the image size

■

Adjusting the projector focus

Adjusting the Projector Height

The projector has a built-in elevator foot that can raise the

projector approximately 1 inch (2.54 cm).

To adjust the height:

1. Raise the projector to the desired display angle, then press the

elevator button

to release the elevator foot

2. To lower the display angle, press the elevator button again

and press down on the projector to lower it.

CAUTION: Failure to press the elevator button before adjusting the

elevator foot can result in damage to the elevator mechanism.

3. Turn the screw on the rear foot

to raise and lower the back

side of the projector for balance.

261799-001.book!!Page!8!!Thursday,!April!25,!2002!!3:13!PM

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 66 67

Keine Kommentare

Compaq MP1200 Betriebsanweisung Seite 19