Compaq DS20E Bedienungsanleitung Seite 62
- Seite / 82
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Linux Installation and Configuration Guide for AlphaServer 62
ECG513/0100
41. Enter “8” for ext2 type.
42. Type “p” to print the partition table – Please verify all your settings.
43. Type “w” to write the disklabel to the disk.
44. Type “q” to quit.
For further information on creating partitions please refer to the Installation Guide provided by
the software distribution vendor.
At this point, the partitions have been created, and the system must be rebooted. You can reboot
by either pressing the RESET or POWER buttons on the front of the AlphaServer system. Once
the system returns to the SRM prompt, follow the preceeding instructions to return to the
"Partition Hard Drives" window. Select the "Do Not Partition" option at this screen.
You will now be presented a window that allows you to select and format the disk for the
software to be installed, entitled "Creating Filesystems". You should use the F4 key to define the
mount point of "/" for sda2 and “/usr” for sda4. Use the F6 key to select the "Normal" formatting
of the drive for both partitions. Once those steps are complete, press enter to continue.
When the window "Change/Create Configuration" is presented we recommend that you make
certain to select the "aboot" package from the "a: Linux Base System" group, and the "xglint"
package from the "xsrv: X Server Software" group. Ensure that you depress the F10 key after
each selection to add it to the installation. If you forget to select these packages, you will not be
able to boot directly from the hard drive, nor be able to run the X Window System software. Once
these are selected, and you have selected any other software options that you require, begin the
installation. If you encounter a message indicating that the xglint software depends upon other
packages, select "Continue", which will ignore that situation.
Post-Installation
System Resource Manager Configuration
After the software has been loaded to the disk, the system will attempt to reboot. Before it begins
the bootup process, press the front panel reset button. This will stop the bootup process, and allow
you to make the final configuration changes to be able to boot directly from the disk, instead of
the floppy or CD-ROM. You should now be at the SRM prompt, "P00>>>". Enter the following
commands to finalize the configuration.
You need to enter these commands, such that the drive reference on the second line needs to refer
to the drive which you installed to:
P00>>>set boot_file 2/boot/vmlinux.gz
P00>>>set bootdef_dev dka0
P00>>>set boot_osflags "root=/dev/sda2"
P00>>>boot dva0 -fi vmlinux.gz
Note - When the system boots, you may see a series of warnings similar to the following:
system.map - incorrect version
This warning indicates that the kernel version that you installed (i.e. the latest version that you
copied from Compaq's ftp site) was not built at the same time as the rest of the kernel. This will
not impact your use of Linux in any way. This warning can be eliminated by installing the kernel
sources, all currently recommended patches and rebuilding the kernel.
Once the system is up, login and do the following:
- Installation Guide 1
- Extended Table of Contents 2
- Introduction 7
- Overview of Installation 8
- Compaq AlphaServer DS10 9
- Pre-Installation 10
- ECG513/0100 11
- >>> 11
- Software Installation 12
- Post-Installation 15
- Compaq AlphaServer DS20 23
- Compaq AlphaServer DS20E 36
- 44
- Compaq AlphaServer ES40 49
- Compaq AlphaStation XP1000 64
- Appendix A 77
- Appendix B 78
- Appendix C 79
- TLZ07 and TLZ09 Errata 80
- Glossary 81
Verwandte Produkte und Handbücher für Computers Compaq DS20E
Computers Compaq S0000 Series Bedienungsanleitung
(123 Seiten)
(123 Seiten)
Computers Compaq W4000 Bedienungsanleitung
(229 Seiten)
(229 Seiten)
Computers Compaq AERO 2100 Bedienungsanleitung
(192 Seiten)
(192 Seiten)
Computers Compaq EXS Series Bedienungsanleitung
(78 Seiten)
(78 Seiten)
Computers Compaq GS60E Bedienungsanleitung
(16 Seiten)
(16 Seiten)
Computers Compaq PRESARIO S0000 Bedienungsanleitung
(123 Seiten)
(123 Seiten)
Computers Compaq PROLIANT ML370 Bedienungsanleitung
(152 Seiten)
(152 Seiten)
Computers Compaq DL580 Bedienungsanleitung
(28 Seiten)
(28 Seiten)
Computers Compaq DA-10832 Bedienungsanleitung
(20 Seiten)
(20 Seiten)
Computers Compaq 4000N Bedienungsanleitung
(196 Seiten)
(196 Seiten)
V7 PA19HBLK-2N Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Handyhüllen V7 PA19HBLK-2N.
Wir stellen 1 PDF-Handbücher V7 PA19HBLK-2N zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Datenblatt
Kommentare zu diesen Handbüchern