Compaq 3000 Bedienungsanleitung Seite 85

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 103
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 84
RAID Array 3000 Controller Shelf
3–34 EK–SMCPQ–UG. C01
If you can access the blowers from the rear of the cabinet, proceed as follows:
1.
Use a Phillips-head screwdriver to remove the safety screw in the upper right
corner or lower left corner of the blower (see Figure 3–18).
2.
Press the upper and lower blower mounting tabs together to release the
blower.
3.
Pull the blower straight out to disconnect it from the shelf power connector.
4.
Align the replacement blower connector and push the blower straight in,
making sure that both mounting tabs lock in place.
Figure 3–18 Replacing a Blower Assembly
5.
Insert the safety screw.
6.
Verify that the shelf and all SBBs are operating properly by observing the
LEDs.
Seitenansicht 84
1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 102 103

Kommentare zu diesen Handbüchern

Keine Kommentare